Zoom X5 5554 with the Red Lights

Click to enter the Zoom


Lights:

| Power | Link | LAN 1 | LAN 2 | LAN 3 | LAN 4 |
All lights are red regardless -- no color changes. Link indicates train (sync) status -- slow blink=untrained, faster blink=final stages of training (authentication, etc), solid=trained.


An Ode to the Link light

She's on when she's happy,
She blinks when she's mad.
But when link light is off,
That Zoom's probably bad.

(When it stubbornly stays off even after you powercycle it I mean.)

Set-up Procedure:

web interface: 10.0.0.2
user name: admin
password: zoomadsl
After that, it's pretty straight-forward. Just stick all the right stuff into the Basic Setup screen, click Save Changes, then click "Write Settings to Flash and Reboot".


Telnet Procedure:

start, run, cmd, ok
telnet 10.0.0.2
at the LOGON PASSWORD> prompt type in "zoomadsl"
2
"username" enter
"password" enter
b
4
a
1
2
00/"vci" enter
m
5
3
This section will determine the encapsulation to be used
0=PPPoA VC-Mux | 2=1483 Bridge LLC | 8=PPPoE LLC
m
s
y
Connection to host lost.

Documentation:

The User Manual for the Zoom 5554


High Resolution Picture Gallery:
Front     Back